About SilverFi



I’ve sown the seeds of faithfulness.
I’ve drawn wonderful pictures
And opened so many curtains…

Divan-i Kebir,
M. C. Rumi



SilverFi is a unique attitude towards recorded music without forgetting “accuracy” and “emotive ability” issues. Our cables are designed to create a genuine path that is “closer to music” and we also think of cables as critical components. We strive to re-create the true tone of music, in every sense, and in accordance with our own artistic vision.

What we are about is tone & timbre, continuity, wholeness and dynamics. Tone&timbre is the key element in music. SilverFi Cables display a harmonically complete tonal neutrality and accurate timbre that you have rarely experienced in other cables. The music will be coherent and demonstrate an unpredictable yet ceaseless flow with ease and spontaneity.

Any information lost at the source is lost forever. So try to preserve as much source detail as possible in the signal chain. We draw our own unique silver and silver-alloy wire.
We use our own creation of silver-alloy and silver and both are hand drawn by our experienced technicians. Thus,it can be said that SilverFi is one of the rare cable manufacturers that produce its own silver and silver alloy, draw its conductors used in its original designs.

Wrong or inappropriate selection of cable is fatal. It will instantly destroy your music and joy of listening. SilverFi is unique in its design, producing our own and various types of silver-alloy conductors and offer a different understanding to cable design, technique, re-production and sound balance.

What SilverFi Cables offer is a sense of wholeness, effortlessness and an even further increased transparency and continuousness. An exceptionally well defined and controlled bass which particularly creates better and more precise transients, midrange reminiscent of high quality triodes and treble pure and lifelike reminiscent of Anatolia’s spring waters beyond compare.The music flows in an effortless and natural sonic riverbed that sets the SilverFi products above lesser cables.

Listening fatigue is non-existent with SilverFi Cables. The sound may touch to your soul. How can this be possible ? It’s what we call “natural resolution”. The fashionable “hi-fi” resolution relies on unnatural treble and sometimes upper midrange emphasis. This type of “hyped” resolution is fatiguing and thereby unnatural. The “correct” balance should portray a sound which is musical, sweet and pleasing especially in the long term.

The fundamental characteristic we must mention about the SilverFi cables concerns what it does not do. It does NOT sound bright, confused, congested, grainy, harsh, shrill, hard, textureless, edgy, strident, icy, offensive, subtractive, additive, peaky, sucked-out, uneven, rolled-off, exaggerated, syrupy, colored, whitish, dark, aggressive, glassy, warm, slow, analytical, ruthless, surgical, glary, veiled, soft, flat, or any number of other things often described. It always and simply sounds like music. SilverFi could make your life more musical.

We have a unique drawing and casting technology. We manufacture our own specially cast silver and silver-alloy. All SilverFi cables have air gapped, discrete strand topology. All cables are fully hand made in-house. They simply can not be made in a bulk form. So, there is no cable bulk to cut from. Every model/order is  prepared/manufactured one-by-one. All our products are bench tested and sonicaly evaluated to assure uncompromised performance and quality.

The break-in is very important. You can listen to our cables comfortably after 100 hours of break-in. The cables continue to mature towards perfection after 300+ hours reaching to 500 hours.You may expect more maturing of our cables in the long run as is the case with fine wines. So be patient…

 Long periods of inactivity may require a new break-in time (50-75 hours at least).

Our cables are not shielded. We feel that fully shielded systems sound less-dynamic, closed, lifeless, blurred, vague and fuzzy. A simple braiding architecture fulfills the function. But, careful attention should be paid to cable routing. Try to be away from power and output transformers and power cables. Implement the aforementioned rule carefully especially if you have more than 1 meter length SilverFi interconnects.

While trying to decide which interconnect and/or speaker cable to choose with differing prices, it can be said that the texture of the music gets enriched, tone, dimensionality, space and dynamics are improved; transparency and immediacy attains a more clear and crystalline character in parallel with the rising price.

We should always bear in mind that sound quality of a cable in the context of metals/metal alloys/materials used is only dependent to a design topology. Use of any ingredient is only meaningful with a decent design approach. Better parts or expensive inputs can not make a bad design work. So beware of the marketing hype and seek for the better cable to get closer to the essence of music.

Technical Info 
In SilverFi we incorporate a common design philosophy: maximize the use of air for insulation and minimize the use of other insulation materials and use the best sounding dielectrics.

Why is air better? Because it doesn’t store energy and then release it out of time with the music the way other dielectrics do. In other words, they don’t smear or congest the sound.

Each silver strand is housed in wider compartments so that each is loosely coupled to the dielectric and  mostly surrounded by air. We try to abstain from using more dielectric or heat/compression techniques during annealing-drawing-tubing, which negatively affect the harmonic coherence and micro-macro dynamics.

This combination of features assures that our interconnects and cables achieve the same high standards of harmonic coherence, transparency and micro-macro dynamics.

SilverFi’s unique silver conductors are each insulated in an discrete air-spaced topology. A hand made technique which is called “cool tubing” helps each silver strand retain their intrinsic quality during the sleeving process. Almost all other manufacturers use excessive heat and chemicals during the production
process of the metal strands which causes poorer conductivity.

SilverFi’s discrete air gapped silver  conductors are not exposed to any heat, chemical process or pressure after being annealed. Heat and pressure changes the conductors’ properties and affects the ultimate performance of the cable.

Important Notes For SilverFi users:
All SilverFi interconnects are directional. For all interconnects please connect “white” shrink side for input (origin/source) and “blue” end to output. This has utmost importance.

Since all SilverFi interconnects and speaker cables are sealed to prevent any damage, please do not attempt to open the RCA or XLR plugs or  speaker cable terminations out of curiosity. They would be damaged and the warranty becomes null.

Please always handle them with care and hold them by the plugs. Pay utmost attention to plugging and especially unplugging. Do not bend or screw them while plugging or plugging. Please also pay attention to layout in concert to other equipment and cabling. Refrain from crossing power cables and transformers to avoid any hum or noise. Interconnects are directional. The white shrink sides should be on the “orientation” (e.g. cd player output) and the blue sides on the “destination” equipment (e.g. pre amp input).

Although the physical handling of SilverFi speaker cables is softer than other brands’ speaker cables, they should NOT be curled, twisted, pushed or pulled. They should always be carried by the walnut plugs. Every leg is discrete and they are advised to be kept 5-8 cm. away from each other (wider is better) and should better not cross each other. Our speaker cables are not directional, but it is better always to use them in the same direction for better conductivity and better break-in.

Solid silver speaker cable wires should not be pushed in or pulled out from the plugs. Any deviation or tilt occurred during the use could be fixed by fingers gently. Solid silver ends could be bent 90 degrees or more with the help of a round pencil (refrain from perpendicular bents) while connecting to an amp or speaker post. It can be later straightened with hand if needed.
Happy listening.


We also fabricate  Black versions of our Turquoise and Reference models. The SilverFi Black Series interconnects offer an amazing blend of liquidity, sound-staging and harmonic richness that is simply beautiful and captivating. Our unique  Black  Series offer superior definition, texture and tone over silver  models. The sophisticated grain free musical texture and tone may astonish music lovers. They are very musical. Images float in space in an atmosphere of ambiance. Black Series offer exemplary depth perspective, superior tonality and spatial information. They are champions of transparency, tonality, dimensionality, musicality and dynamics. They are for the perfectionists.


(in custom made stereo pairs: 200cm., 250cm. and 300 cm. standard lenghts ,USD.)

SilverFi prefers not to use spade lugs or banana plugs for speaker cable termination to attain better sound. We prefer naked, round, gold plated pure solid silver cable termination.

You may use our speaker cables’ either side from the beginning. But it is better to use them in the same direction without reversing the cable terminations for a better conductivity. So, for best results in the long run (in case you change the cables frequently or use them in different rigs) tie a thin color string or a colored paper tape to indicate the origin and destination sides of the cables.

Please pay utmost attention to red (+) and blue/black (-) legs when connecting the speaker cables. Always connect the red leg of the speaker cable to red (+) sign of the amplifier or speaker binding posts and blue/black leg of the speaker cable to (-/ground) or black sign of the amplifier or speaker binding posts. Keep each leg parallel to each other and at least 7-8 cm. away.

To place an order please send us a mail.

(saktanbers@gmail.com or info@silverfi.com)

We do not accept cheque. You can transfer funds via T/T, Western Union or Money Gram. Paypal payment is also possible. Please add 4% Paypal fee to your cost. Please call for the payment details. Your order would be programmed only after your transfer received by SilverFi.

Postage fee will be charged according to order quantity and shipping weight. Please check our normal post office and courier fees according to country/weight parameters. Shipments could be sent either as standard post office air-mail small package or by a special Courier Service (like UPS, DHL or FedEx).

Lead Time
The normal lead time after receiving an order is 2, 3 weeks normally for interconnects and 8/10 weeks for speaker cables depending on the backlog. There is always a waiting list. So check before ordering for the exact dispatch day of your order.You will be informed after you would place your order of the shipment dispatch/tracking number details.

All sales are final unless agreed by us, in writing, before purchase.
At our discretion, we may allow some items to be changed or returned. If we do authorize a return of an item, 20% restocking fee (excluding the shipping charges,customs duties (if any) and all transfer costs will be deducted from your refund. Restocking fee for non-standard interconnects and speaker cable lengths, versions and XLR-RCA or XLR-XLR cables is 50% excluding the purchaser`s shipping and transfer costs. Shipping charges are not refundable.

SilverFi interconnects and speaker cables are warranted to be free of defects in materials and workmanship for a period of 5 years for the original purchaser from the delivery date of cables. If a failure is found in the product, the customer must first notify SilverFi by e-mail immediately. The customer will be responsible for shipping the product back to SilverFi. After evaluation of the returned product, if SilverFi determines that misuse, alteration or abuse did not cause the failure, the customer will receive a working cable (which may be the repaired unit). If misuse, alteration or abuse is indicated, the customer will have the option of a repair fee (including the transport cost) determined by SilverFi Cable depending on the extent of the damage.



“With plenty of bona fide Sufi saints in Turkey, Sezai Saktanber is a Pîr or Sheikh of a different sort. He’s a master realsizer if I’ve ever met one.”
Srajan Ebaen, 6moons.

SilverFi Cable is the first `6moons` ‘Realsization Award’ Winner:

“Spatially huge, tonally reminiscent of that presence factor we admire with the best direct-heated low-power triodes; rhythmically vigorous with no loss of apparent speed or precision yet texturally smooth; super bass definition and impact without additive girth; and long-term listening ability without fatigue – these are the calling cards of the SilverFi interconnects, with the spatial expander action already in full evidence with the least expensive model but tone/body increasing as you climb up the ladder.”

Srajan Ebaen- www.6moons.com


“Another key characteristic of the SilverFi wire loom was the lovely sense of space and openness. Some cable combinations can seem to confine music in a box to sound slightly claustrophobic. Not here. These Turkish cables excelled with soundstage dimensionally both in depth and width. Images were also remarkably full, developed and firmly anchored in this open sonic landscape. On large scale-orchestral works, I could peel back the layers and clearly hear the various sections of the orchestra.
Instrumental and vocal tone color was exemplary.Textures were real and lifelike. These characteristics were clearly audible from Sezai’s cheapest interconnect and moving up through the line, brought not only greater tonal refinement and detail but also revealed more of the inner beauty of music – a little more of the musicians’ intent and a little more musical truth. Plus there’s that feel I mentioned earlier where I can just forget the hardware and simply groove to the music…
…In conclusion, SilverFi cables were exceptional conduits to musical goodness. These are grain-free, transparent, open and dynamic yet tonally full-bodied cables that music lovers should enjoy… In terms of price and performance, these are among the more satisfying cables I’ve tried. Warmly recommended.”

Paul Candy, www.6moons.com

Sezai Saktanber